Cone crusher operation and maintenance of Note

1, there must prevent the crushing chamber over iron iron removal device, if frequently over the iron, may cause off axis accident.
2, to full production, otherwise there will be a product granularity is too coarse.
3, cone crusher at work feeding should be uniform, not segregation. If you feed unevenly appears to reduce production capacity, product size is too large, frequent spring action, bowl-shaped bearing pressure, increased power consumption.
4, lubricating oil to be changed frequently, not too dirty, filthy will accelerate the wear of the gears and bowl watts, sleeve, the sleeve research dead even.
5, the drive belt installation can not be too tight, otherwise it will cause the drive shaft rotation is not flexible or broken; nor too loose, otherwise it would cause a stuffy car crusher.
6, the feed can not be too wet too sticky, not too much of the fine-grained, can not be too large, otherwise it would cause a stuffy car.
The crushing ratio distribution in the production line to be reasonable, in order to maximize the efficiency of the crusher.
7, the spring pressure is not too tight, too much pressure may also happen with the broken shaft accident, frequently beating the pressure is too small spring impact crusher work properly, and the product coarsening.www.unique-machinery.com