The jaw crusher is the most frequent repair project is to replace the thrust plate. For the connecting rod is the overall crusher to remove the thrust plate must tighten the baffle bolt, cut off the the dry lubricating oil pipe, thrust plate hanging on the crane lifting hook or other lifting equipment, and then only loose open horizontal rod at one end of the spring, the movable jaw pulled direction of fixed jaw, remove the thrust plate. If you want to remove the thrust plate, should be the connecting rod and the front thrust plate and moving jaw opened, remove the thrust plate.
Remove the thrust plate, cut a thin lubricating oil pipes and cooling pipes, bracket support live below the link, and then remove the connecting rod cap in order to hang the rod. Crushing machine spindle should be used together with the pulley and flywheel removed. Motor (together with the belt) along the rails as far as possible closer to the crusher, remove the V-belt, and then with a crane to lift the shaft. The demolition of the movable jaw must cut off the dry oil lubricating oil pipe, remove the rod, remove the bearing cap, and then the movable jaw with a crane or other lifting equipment pulled out.
没有评论:
发表评论